Cellular Line interphone F5 Specifications

9Special Features High Volume or Low Volume Mode Setting to high or low volume mode depends on user’s helmet design or structure. Some helmet ty

10Voice Answer and Reject Mode • When activated, the user can accept a call by saying any word within 10 seconds. The user can also reject a call b

11Advanced Functions Driver to Passenger or Bike to Bike INTERCOM The BLUEANT INTERPHONE has motorcycle intercom system that allows driver to passe

12down on one of the Interphones until you hear the second beep, then both units will resume intercom mode. 3. During intercom mode, the ring of the

13Specifications Bluetooth Compliance: Bluetooth Version 1.2 Specifications Supported Bluetooth Profiles: Bluetooth Headset and Handsfree Profiles

Help Phone/Device Software Please make sure you have the latest firmware upgrade for your Phone especially if you are using a PDA Phone. Go to the su

Disclaimers: This manual is published by BlueAnt. The information contained in this document is subject to change without notice. All rights reserv

BlueAnt InterPhone Features Automatic Volume Adjusting High/Low Volume Modes Voice Dial and Voice Answer Bluetooth Helmet Handsfree Rider to Passe

Package Contents Product Descriptions The BlueAnt InterPhone is a Bluetooth Headset designed for the motorcycle rider and passenger

Charging the Headset Note: After opening the box please charge the InterPhone before using. 1. Connect the provided AC charger’s plug to the Charger

Installing the Clip Mount Important: There are 2 types of Headset Clips included in this package. Either can be used with full

Using the Headset Clip Mount with Adhesive 1. Before removing the protective strip from the double-sided adhesive, find the best location to place t

3. Next, take the Ear Speaker(7) and attach it to the Velcro Pad. Run the Microphone Arm down along down to where your mouth will be. As the Microp

7Basic Operations IMPORTANT: The BLUEANT INTERPHONE needs to be ‘paired’ with your Bluetooth mobile phone before you can use the following function

8Reject a Call (For Handsfree Profile Phones only): To reject an incoming call just press the MFB(1) for 2 seconds (2nd beep). Or, Assuming th